B.Master is produced and delivered in a very short time. At specific times of high demand during the year, times may increase slightly. For more precise information, please contact us and request a dedicated quote!

Of course: as per current regulations, the warranty is already active at the time of purchase and offers 12 months' cover for VAT-registered purchases.

B.Master Twin XL misura 310cm x 175cm (H) x 90cm, ha un peso a vuoto di circa 270 Kg e al suo interno ospita 176 ripiani in acciaio inox che garantiscono 50mq di superficie essiccante.

Dipende! Dal prodotto, da come lo prepari e da come lo disponi sui cestelli. Abbiamo creato alcune tabelle di riferimento che trovi nel catalogo, ma per avere un'idea esatta di quanto prodotto puoi caricare, disponi il prodotto su un metro quadro di superficie, così come faresti nell'essiccatore. Poi moltiplica il peso del prodotto disposto per la superficie essiccante della macchina, in questo caso 50 metri quadri.

The power expressed in kW expresses the maximum energy consumption when heating elements and fans are both operating at full capacity. The precise consumption depends mainly on the ambient temperature outside the machine and the amount of total moisture in the product being dried, most of which must be disposed of in the first few hours of drying. Remember that drying is a process that tends towards equilibrium and that, in the very first hours of drying, the aim is to eliminate as much water as possible, especially that present on any wet surface of the product. Moisture is thus disposed of conspicuously at first, then more and more slowly, so the temperature inside the machine will tend to be lower at first, then stabilise. This is why electricity consumption will be much higher at the beginning, and then decrease considerably as time goes by.

The humidity is discharged into the room where you have placed the dryer, which for this reason must be sufficiently large and well ventilated. B.Master Plus can be connected to a humid air disposal pipe if the room where the machine is operating is not large or ventilated enough to accept the moisture extracted from the products, or if the product has a particularly strong or unpleasant odour. If the automatic ventilation module is also purchased, simply connect a round pipe directly to the air outlet.

Yes. If you dry in order to resell the dried product, you will need a dedicated space that complies with European legislation on the safety and hygiene of food processing environments and foodstuffs (EC Regulation 852/2004 at the time of writing) by adopting a control plan according to the H.A.C.C.P. system. This space does not necessarily have to be for the exclusive use of the dryer, but it must still comply with the regulations in force.

No. B.Master Twin XL è pronto all'utilizzo. È sufficiente estrarlo dall'imballo, posizionarlo nello spazio che hai previsto e collegarlo alla corrente. Qualora alcune componenti venissero fornite smontate per motivi di sicurezza durante il trasporto, ti allegheremo tutte le istruzioni per il montaggio, un'operazione semplice e veloce, che non richiede l'utilizzo di attrezzatura particolare.

Il modulo di ventilazione automatica di B.Master Twin XL è stato studiato per mantenere sotto controllo il livello di umidità dell'aria all'interno dell'essiccatore. L'umidità del prodotto è misurabile con appositi strumenti, diversi e specifici per ogni tipo di alimento essiccato.

Yes, it is possible to install a timer as an option. This will only switch off the heating elements, while the internal fan will remain on, both to maintain continuous ventilation inside the dryer and prevent the product from regaining moisture, and as a safety system in case the heating elements do not switch off.